Curing Ovens With Conveyor
Curing Ovens with Conveyor allows easy usability, high production capacity and low opertional costs.
Thermo-block (Heating Unit) was mounted to the back side of the oven. There is a burner system in the heating unit, which turns the fuel into the flame and an exchanger system is made of stainless stell, turns the flame into heat and also fan system dispaches the heating air through the oven. The surface of the panels inside the oven is made from 1 mm Galvanize Sheet Metal, and the surface of the panel outside the oven is made from 1 mm Painted DKP Sheet Metal.There is an insulation material between the panels consists of the mixture of rock wool and glass wool preventing the loss of the heat.
The air canals in the oven are specially produced from galvanize sheet and desined in order to disrubute the heating air homogenously through the oven. The conveyor system is the mechanism called by Webb Type ( I — Beam Type). The conveyor trolleys mounted on the chain are freely move on the NPI 80.100 profile. The carrying capacity of unit burden on the conveyor is 140 kg/m. There are 600 mm gaps between the each trolleys. 4 jeans easyly can be hung in every 600 mm gap on the conveyor.
In this system, the electrical materials using in the control box are Siemens or Telemechnique. Heat balance in the oven can be easily adjusted by taking the heating measurement from one point of the oven. According to the temperature in the oven, burner system cuts out and exhaust system cuts in automaticly. By this way the heating balance in the oven can be controlled and also prevented maximum energy consumption.